Quick bass trap question

One quicky... I've seen some corner bass trap drawings on this site that show the distance from each corner is 24 inches. How much less can I make these ? My room is quite small (14x12) and I'd like to move it back to about 20" if I can. Will my frequency absorbtion decrease substantially because of this ? Is it still a fair plan ? Thanks again to everyone.

smog - if that's the case maybe you need a different treatment like a rear wall of 703 but the wall angled forward so it's flush with the wall at the bottom but a foot away at the top. cheers john

The corners made by the walls and the ceiling are usually "free space". Thomas

Thanks John. I was going to do a 703 wall on your reccomendation from before anyway. Should I not do the bass trap on the rear wall ? I was planning on doing a corner trap in each front corner as well. I can get away with losing 2 feet there. Are two front traps going to help me there ?

The front raps are OK - I assume you are using nearfields ?? cheers john

Yes John I am using nearfields. One more question about the absortive back wall: Have you built one before ? Would you have a drawing of the framing ? I assume I'll build out of plywood and do kind of a box design where I can fill in the box with framed 2x4 sheets of 2" 703 covered in burlap. I expect to leave 2" open behind the insulation at the bottom, and all the way up to 8-10" at the top. Does this sound like what you are talking about ?

Ken - take a look at Luis construction here http://johnlsayers.com/Studio/Mainpage/ ... ctions.htm go to update 3 and check out the rear wall of his control room - you should get an idea from his pics. cheers john