newbie control room help

Hi All, I was wondering about wall and ceiling treatments in my small control room. The whole thing is primed drywall with a wood floor right now. The measurements are as follows: Length - 14’4 Width - 10’2 Height - 7’4 The left wall has the live room window (2’x3’) starting 2 feet from the front wall. - fabric wrapped insulation on the back wall - slot resonator on each side wall. - Ceiling treatment would be fabric wrapped insulation in 1x2 frames over the mix position Questions - Should I use an angled back wall, or does the fact it’s absorbant negate this ? - What should be on the front wall in front of the mix position ? - Are there other threads someone has been involved in that may help ? I’m sorry there’s no drawing here I will try and provide in the mean time. Thanks for all your help. I can’t believe how much I’m learning here on this site.

Hi smog.

Questions - Should I use an angled back wall, or does the fact it’s absorbant negate this ? - What should be on the front wall in front of the mix position ? - Are there other threads someone has been involved in that may help ?

In your room I'd angle the rearwall forward from it's base so it';s around a foot off the wall at the trop, You can put a slot across you front wall as well. Check out Luis's construction - his pics really show ghow to do it :0 http://johnlsayers.com/Studio/Mainpage/ ... ctions.htm cheers JOhn