Key posts: Planning design of a full recording studio/ Now building...
Substantial posts by orangenumerik, who started the thread, and by the forum’s most active contributors. 13 of 23 posts are listed.
Page 1
orangenumerik, 7 February 2006Hi there ! What a marvellous resources this forum is, there is so much info i get confused ;-) . First i would like to specify that english is not my primary language,…
knightfly, 10 February 20061a.Are those dimension realistics or acousticly correct? (Specifically the control room See Fig.C) The average length vs. front width is approx. 1:1.34, with a ceiling…
orangenumerik, 11 February 2006Thanks for answering Steve ! When you say 4.8M for the ceiling do you mean Meters ? the Plan i have provied indicate a ceiling height of 3.123Meters, that is more than a…
knightfly, 12 February 2006Your average dim's for the room are about 3.7 M wide, 4 M long, 3.1 M high; these are averages since splayed walls are involved. Using those averages the Bonello…
orangenumerik, 14 February 2006Thanks Steve About my control Room dim's, originally i tried to fit my CR into a H1/W1.28/L1.54 ratio. And i used the exel spreadsheet called "modes1" that i found…
orangenumerik, 13 March 2006Here's the hopefully last update of my floor plan Control room and whole studio. I have move the entry door and machine room, wich give me more space and a place to put…
orangenumerik, 14 March 2006Thanks for pointing that out Steve, i was aware of that but i tought that since sound reflected from the window was comming out of the speaker at 50 degres angle or so,…
orangenumerik, 15 March 2006Hi John ! Sorry if this is obvious, but what exacly would be the problem with the rear walls ? Did you mean the big blue triangle (Bass trap) at the back, wich is…
orangenumerik, 15 March 2006Hi Dirk It's always nice to have some feedback from other user of this forum, i did know about the reflexion you showed in your graph, the reflexions comming out of the…
John Sayers, 16 March 2006OK - there are two factors here. The first is the directivity of speakers. The midrange and tweeter speakers in a standard system are directional. In other words they…
orangenumerik, 16 March 2006Hi John I did know about the 30 degres span and frequency diffusion but not about the time relationship of reflected sound vs direct sound, i doubted there was something…
orangenumerik, 17 March 2006The words of thruth came from man of wisdom... so simple yet so true ! So, i put the slots on each side, and make the rear walls dead, right. Now if i do that, my only…
orangenumerik, 8 August 2006Well it's been a long time since my last post. I have finally settle to go on with my last drawing. Lots of things have been done since then .I have been very very busy…