Still unclear on corners absorbers

I inquired about this a few days ago but am still unclear. Below is John's design for the corner absorbers. Should the 703 be placed as in example "B". That is, with a space between the different layers of 703? Or, as I've shown in example "A". Fill the cavity with 703? Thanks, Earl

Neither; here's an update I did a few months ago http://www.johnlsayers.com/phpBB2/download.php?id=4421 General rule of thumb is, for a slat resonator you want roughly half the depth filled with insulation; for a corner trap, a single piece of 3" or 4" 3 PCF is fine. Place as shown/described in the above link... Steve

Thanks! That clears it up for me.