Ideas about optimize my homestudio

In shame im writing this thread but i have searched the forum for answears its true :wink: My biggest problem in understanding how to optimize the acoustic in my controllroom without tearing the hole room apart and rebuild it again is the angled wall/roof, the room is on the second floor (rebuilt attic) in a old timberhouse. What do you think they do to the acoustic ? i have done some outlines of the room you can watch and you are more than welcome to comment :shock:

Kir, I didn't see any specific questions, so here's my general advice for room treatment: * Bass traps in as many corners as you can manage, including the wall-ceiling corners. * Mid/high frequency absorption at the first reflection points on the side walls and ceiling. * Some additional amount of mid/high absorption on any large areas of bare parallel surfaces, such as opposing walls or the ceiling if the floor is reflective. --Ethan

Thanks Ethan for the advice ! Something like this ?

Welcome Kir! Sweden in da hizzouse. Your overhead looks good. Attached is more or less what I would do with the profile. It would depend also on how "dead" you want it.

Kir, > Something like this ? < You bet. --Ethan

WiseMindsRecordingStudios wrote:

Welcome Kir! Sweden in da hizzouse. Your overhead looks good. Attached is more or less what I would do with the profile. It would depend also on how "dead" you want it.

Thanks !!! In my eyes that looks really "dead" :twisted: 2.10m is not overhead its the hole height :shock: How are they placed in the room, dimension ? explain how your are thinking.

I meant that your overhead drawing view placement looks good. But the profile view, the one I posted, I would do differently. I can do a "not to scale" mock up in sketchup and post a photo if you like.

Now im with you :oops: That would be nice !! Here are some photos of the nest http://home.swipnet.se/DCLXVI/Homestudio.htm