Hello , I have been reading a lot here in this forum , im a sound operator for tv broadcast and post-production. just in a year i strated to recording bands with protools, now i have a space with 60m2 for a rehearsal room a control room a drum booth, attached to this post is the space plant , I apriciate if you guide me with some ideas.
Best regards.
Hugo Camarinha
Portugal
60m2 for a rehearsal room a control room a drum booth
Originally posted at johnlsayers.com, topic 4184.
Are the walls in your diagram already built?
If so can they be removed if need be.
Whats the bumpout on the 9.2m wall?
Hi DDB the walls are aleredy built and I can not remove them :( the bumpout is a 78cmX24cm wall with water pipes inside.
Best Regards
Hugo - how do you get in there? where is the entrance door?
cheers
john
Hi John,
Here is the entrance door..
Best Regards
Hugo Camarinha
how big is that sliding door?
Maybe something like this Hugo
cheers
john
Hi DDB the slide door it has 120cm.
Hi john thanks for the tips! I realized for now that it would be no reason to construct a drum booth. So the way that I think to best use my space is to build a rehearsal/recording room.. By the way I need to do a 60 or 70db reduction in the rehearsal/recording room, because I have neighbours above me (residential building) and offices at the left and right sides…I’m reading about Modular Acoustic Booths and I thick that’s the best way in my case (I pay a rent) to get a rehearsal/recording room in a little time, and built reinforcement Walls and Ceilling outside the booth to a better db reduction.
Here's my latest idea:
Best Regards
Hugo Camarinha
Ps: Sorry about my Portuguese English :|
Hello,
I am not a specialist but I wont think it will be good to put all your mixing stuff in 10,9 m2 ! ... look a bit small
and by the way with your solution you loose a lot of place ....
just my 2 cents (as they say !)
good luck it is really hard work but also great pleasure (when it is finished !)
Hi 10,9m2 is perfect for me, I work with Protools and I just need to have a couple of preamps and dynamics has outboard gear , I do all the rest inside Protools software! Best Regards Hugo CamarinhaHello, I am not a specialist but I wont think it will be good to put all your mixing stuff in 10,9 m2 ! ... look a bit small and by the way with your solution you loose a lot of place .... just my 2 cents (as they say !) good luck it is really hard work but also great pleasure (when it is finished !)