We blew out a mid speaker today. Anyone know where to find:
4 inch mid-range speaker
8 Ohm
100 Watt
Any help you could provide would be appreciated.
Thanks
Replacement Speaker??
Originally posted at johnlsayers.com, topic 3860.
Sound reinforcement, Studio monitor, or does it just have to be round and make noise? :wink:
For our homemade PA speakers.
I know its a fair ways away, at least from me in Canada sort of definitely from John in Australia, but try a place in Ohio called Parts Express for starters.
http://www.partsexpress.com/webpage.cfm?webpage_id=3&SO=2&&DID=7&CATID=49&ObjectGroup_ID=298
Good hearted humour.
HAve fun!
Andre
That's funny because I'm in Ohio right now. I called parts express and they were in awe with that speaker config. They could only offer a 5 inch with same specs. I actually found a small speaker repair shop in town that had two of the speakers I needed in stock. They stated I was lucky since that is such an odd speaker spec.I know its a fair ways away, at least from me in Canada sort of definitely from John in Australia, but try a place in Ohio called Parts Express for starters. http://www.partsexpress.com/webpage.cfm?webpage_id=3&SO=2&&DID=7&CATID=49&ObjectGroup_ID=298 Good hearted humour. HAve fun! Andre
Cool, good luck - if they were blown because of too much volume, you might wanna think about getting some in-line automotive type fuse holders and re-wiring with fuses - somewhere around 3 amps would protect a 100 watt 8 ohm driver, full wattage would take about 3.75 amps if my calculations aren't too rusty... Steve