Bluefield Wiring Plan (WIP)

Hello all! Aaron came down to Atlanta a few weeks back to help me with my wiring plans and install. If people are interested, I can try to document the ongoing progress as I wire my studio together. The wiring will consist of connecting a Trident 80C with a Radar 24, 24 live Room mics, 8 CR mics (all hard wired to tuchels -- ie no mic ties in the patchbay, Headphone distribution (Constant Voltage/High Impedance style), TT patchbay to ADC punchblocks for outboard, plus various connects such as XLR - XLR from CR to LR and Speakons for re-amping etc.. Here's a screenshot of the plan I'm working on. A little hard to read - not sure if I can post pdf. files? Let me know if there is interest and I can post more as the plan/work commences. Best, Dave :D

Here's the radar schematic - will be 6 30' cables db25 - tuchel , 3 balanced 8 for IN, 3 balanced 8 for OUT. This was based on Aaron's original rendering. This shows one of the drawings of 6. Dave

I see I can post pdf's. The whole plan was too large :shock: Anyhow..here's how the constant voltage headphone distribution is shaping up :lol: Dave

There's nothing more exciting than a wiring up Tuchel connectors. Almost as much fun as a Jones plug I guess.

Dave, Pin 1 is always Shield. Check your XLR pinout on the cue system. Send me a copy of those diagrams, I can't read half of it on the pic. All blury... Lookin' good though. :D

oops...yeah....... :oops: sending you the pdf.'s too bad there is no way to improve the resolution here. Dave

The headphone distribution is drawn wrong, as Aaron pointed out. Thanx Aaron! It should read pin1 common, pin2 left, pin 3 right, to correspond with proco's HJ-4P pinout. :lol: Best, Dave Now onto choosing connectors and wire...looks like its going to be Gepco ...for the wire..p robably work on the radar harness..first...then onto the mic panels.