I was reading though the posts about the step sequence in drywalling and and caulking and it mentions not to tape the perimeter by the adjacent walls, floors, and ceilings but to use acoustic sealant. Does this mean you do not tape the corners and all? Is there something else you so to finish the wall?
And also does anyone have any suggestions for lighting in an iso booth. The booth is 6 X 7 with 7' ceiling. Should I mount a light on the ceiling or just leave a light to be plugged in?
Thank god for this forum.
Drywall taping and lights
Originally posted at johnlsayers.com, topic 2833.
Builder, sorry this managed to "slip through the cracks" - hope I'm not too late for you -
Rod Gervais is the guy I ask when I'm not sure on something, and he's been good enough to chime in on this, here
http://www.johnlsayers.com/phpBB2/viewtopic.php?p=20665
As to a light, if you have pretty good isolation and don't want to goof it up I'd stay with a surface mount light fixture - the fewer holes (caulked, of course) the better. (Needless to say, I would NOT recommend using a candle for this, especially if you have foam inside :? ) Steve
I agree with Steve here - I would use either a single incandescent or track lighting.