BOOTH HELP

Hello, i am having a problem trying to acoustically treat my booth in my studio. I don't know where to start but in the control room i use rigid fiberglass. would i also use this in the booth. Can you guys give me your opinion on what to use. Thanks

CAN SOMEONE HELP ME PLEASE!

Sorry, guess Thomas is pretty busy with his new company startup; that's kind of an odd-shaped booth; what do you use it for, and is it possible to "steal" some of that space for a corner trap at the end opposite the door? Generally, you want a booth as dead as you can get it; using 2 to 4" fiberglass (the rigid kind) on at least the upper half of walls and the ceiling is a good start If you have the headroom, leaving a 3 to 4 inch gap between the ceiling and the fiberglass helps widen the range of frequencies that are absorbed. If you're doing acoustic guitar in the booth, then a slat resonator tuned to around 300 hZ would be good; it should help tame typical body resonances somewhat. This page should give you some ideas for traps - http://www.johnlsayers.com/HR/index1.htm And here is the corrected calculator for the slat absorbers - for a corner trap, use the average depth in calculations - http://www.johnlsayers.com/phpBB2/viewtopic.php?t=1363 Hope that helps, let me know if you need more info... Steve