Key posts: Andy Eade’s New (Not Rotten) Basement Studio #2
Substantial posts by andy_eade, who started the thread, and by the forum’s most active contributors. 10 of 13 posts are listed.
Page 1
andy_eade, 9 January 2019Hi guys! Some of you may have seen my previous Studio build diary from about 13 years ago. If not, and you’d like to read all about dealing with leaky basements,…
andy_eade, 9 January 2019Hi guys, I’ve moved this question from the design to construction thread as it makes more sense for it to be here since it is now a construction issue. At the top of the…
andy_eade, 2 February 2019Thanks Greg. I’m pleased to say that it is finally all done. Sheetrock and lots of acoustical sealant. The structural pole is also now framed, insulated and three layers…
andy_eade, 2 February 2019Ok so I have a few questions about Baffle Box fundamentals for Greg, Stuart or anyone else with experience. This is one thing I didn’t do on my last build, and I suspect…
Gregwor, 2 February 2019Make sure you take those off, caulk where they are and then reattach them in a different spot --> just move them over :wink: That way you ensure everything is sealed…
andy_eade, 3 February 2019Thanks so much for your quick and detailed reply Greg. Your comments were super helpful and right on point. Here are some follow ups to items you had mentioned: Already…
Gregwor, 3 February 2019Absolutely! I see pro dudes with speakers sideways sitting on their meter bridges like Chris does all the time and cringe. Sure, they pump out great mixes, but it…
andy_eade, 3 February 2019Yeah I certainly agree with your points about sofiting the speakers, and for how much work and money has gone into this, it would be kind of crazy not to spend the few…
Gregwor, 3 February 2019You definitely need the front half of the room to be symmetrical. You can't tweak that one side? Maybe put a door at the front/center of your room between the speakers…
andy_eade, 3 February 2019Unfortunately not Greg. I need to be able to use the Control Room and allow traffic to get from the outside door to the studio without disturbing what’s going on in the…