Substantial posts by Hendrik, who started the thread, and by the forum’s most active contributors. 12 of 26 posts are listed.
Page 1
Hendrik, 28 July 2004Hello, this is my first post. I am from Germany and my english is not good. So I hope you understand my questions..... :wink: My plan is to build a studio in an old big…
Hendrik, 29 July 2004Hi Aaronw, i have read a lot on this site. It´s a great Information pool. I know this "STR Picture" But the question is: Is the left site of this "STC 63 System" for 1…
knightfly, 29 July 2004Hendrik, first of all welcome to the board; no apologies necessary here, your English is vastly better than my German (or any other language, for that matter) 1 - the…
Hendrik, 29 July 2004Hi Steve, thanks a lot. Question 1-3 is answered and the important thing is: I understand it!... :-) But 2 more questions: A) Is a larger air space better? Or does the…
knightfly, 29 July 2004a - yes, larger space is better - I was going to ask whether you mean the space between wall panels or the space in the room, but realized the answer is the same. More…
Hendrik, 30 July 2004Hi Steve, thanks a lot. I understand that and yes, I meant the air space between the wall panels. A further question concerning the Ratio thing. How do I calculates the…
Hendrik, 3 August 2004Hi Steve, Ok, something gone wrong. Here is the picture now. and here are the questions again. Question1: How much degree should I angel the side walls of my control…
knightfly, 6 August 2004Your CR needs to NOT have the mix position dead center front-to-back - more like I shifted it in a markup of your plan, only with the rear surrounds moved forward too,…
Hendrik, 6 August 2004Hi Steve, I did not understand that. Can you explain that in simpler words? The Symetrie is with + - 30 degrees and +-110 degrees fixed, how the 110 degrees are a little…
knightfly, 7 August 2004Sorry, damned ISP was screwing up so bad when I posted that I forgot the pic - Are you familiar with room modes, nodes and anti-nodes? These are the problems I was…
AVare, 7 August 2004Steve: If you are referring tot he grammy document you are correct that it ignores construction. As far acoustics goes, it defines what the results should be, without…
Hendrik, 7 August 2004Hi AVare, I mean your "Recommendations For Surround Sound Production" linked document... :-) The 5.1rec.pdf!!! I readed it there... When you follow this, you have´nt a…