Substantial posts by Martin Tenbones, who started the thread, and by the forum’s most active contributors. 8 of 18 posts are listed.
Page 1
Martin Tenbones, 26 September 2014Hello everyone! May I say this board is fantastic. I believe I have read all the pertinent data, and it is with slight nervousness I begin… What began as a simple roof…
stevev, 3 October 2014Hi Martin, i'll try and shed some light on your questions and hopefully one of the 'gurus' will drop by at some point as well :D It might be a good idea to pause on…
Martin Tenbones, 4 October 2014Thanks for the reply! 1. The roof. Well there's no way around it being a low slope roof attached to the side of the house, it will have 5/8 tongue and groove plywood on…
stevev, 4 October 2014The plywood sounds good, but I'm not entirely sure what 'low slope' roofing material is. Filling the cavity with insulation is the way to go. 30 kg/m for fibreglass, 50…
stevev, 5 October 2014i'll drop past next time i'm in Toronto and take you up on that offer :lol: nice one! And if you really wanted to get your isolation right up there you could core fill…
stevev, 5 October 2014Basically, anything that is weather proof and airtight sealable is acceptable. After that it's about mass. Which is in turn about isolation. You could do a 1/4 inch…
Soundman2020, 15 October 2014Possibly, possibly not... it all depends on if it was designed to handle the extra heat load and static pressure from the studio area. You'd have to get an HVAC guy to…
Martin Tenbones, 21 September 2015Ive Improved my sketch up abilities 4%. Image not preserved: LIve Room3.jpg Image not preserved: LIve Room 3B.jpg The aforementioned Live Room. Theres my idea for a…