Key posts: Garage Studio/Practice Space *UPDATE**FINISHED*
Substantial posts by israelhands, who started the thread, and by the forum’s most active contributors. 10 of 15 posts are listed.
Page 1
israelhands, 26 September 2013Just to get everyone caught up to speed viewtopic.php?f=2&t=17524&p=122456&hilit=texas#p122456 Needless to say I left the forum for a while (with my tail between my…
israelhands, 26 September 2013then completely redid the electrical. 3 outlets on each wall long wall. 2 by where I put my desk. 1 by where I put the ac. 3 on the short wall. And also ran speaker wire…
israelhands, 26 September 2013ok so then i had to figure out what I wanted to do on insulation. Big discussion on that on the old thread viewtopic.php?f=2&t=17524&p=122456&hilit=texas#p122456 but i…
israelhands, 26 September 2013Now it was drywall time. i went with 5/8 on the ceiling also did flush lighting. currently have just regular flood lights up gonna upgrade to some led's so they wont put…
israelhands, 26 September 2013then we were ready for walls. 2 layers of 1/2 with make poor green glue substitute. it was a 80% silicone based adhesive that dried really gummy kinda like green glue.…
israelhands, 26 September 2013as for AC and heat goes this was an internal debate inside of myself for months. originally i wanted to do a Mitsubishi mini split but later realized funds wouldn't…
israelhands, 26 September 2013ok so then moved on the texture, paint, floor. Did a really thick chunky texture For the floor I used this really thick heavy duty paint that is actually for outdoor…
israelhands, 26 September 2013Now treating the sound in the room was another tough decision for me. little bit of a back story on that here viewtopic.php?f=3&t=18406 I ended up with 32 - 1in panels…
israelhands, 26 September 2013As you can probably tells I wrote all these posts in a hurry and without much detail. If anyone has ANY questions on anything i will gladly elaborate. this was just a…
Soundman2020, 11 November 2013Great it's working out for you! A lot of effort went into that, clearly. Most likely that is your door seals, and that can be fixed fairly easily by replacing the seals…