back to the drawing message board

here is my shell of a control room...the outer framing has been done, so this is my inner dimensions. I can't figure out how to get a good angle on the speakers, as well as the splayed walls, which I imagine will need to be slat absorbers. sincerly...lost :)

IMO the last design I saw of yours was the best use of space. If your having trouble making your angles for the monitors work with that window just consider closing up some of window. Only leave say 36" instead of 48". That would get you closer. Other than the design you had before I wouldn't be able to recommend anything better Ron

mate - aren't we going around in circles here - I've already drawn it for you - here it is again cheers john

yes, but when I went to the 4 foot window, everything got messed up and my angles were all screwed up :( Also, the dimensions I gave you was for the room with no framing (floor only), these new dimensions are the inside diameter of the room. Further screwing things up is the second window into the vocal booth. also, the front window will be flush as this is a free standing room Really sorry about the confusion. Any help getting me straightened out would be greatly appreciated and help me get a good nights sleep :)

Here it is scaled to the new dimensions. cheers john

John, I can't thank you enough for this.