Large Studio in Rural NSW....A Quick Beginners Question.

Hello All, Thanks for all of your insight and enjoyable reading. I just had a quick question. I am new here and realise I am still stumbling along discovering the hidden truths of studio design. And I'm enjoying the task althought it's new to me. We are about to build a studio in a large (21m x 10m x 3.5m) shed on our small property into Regional NSW. I have included a quick drawing from Sketch up which I have been learning for approximately 2 hours now so please ignore the obvious mistakes at this stage (such as no doors etc ;-) i have dropped in some of Johns Modules in the CR and I just had one quick questions before I burrow my head back into learning learning learning. If I soffit-mount my speakers as in the picture, can I remove the slot resonators (so I can place a door heading out into the airlock) and mount Slot resonators in an alternative location. Any suggestions would be appreciated and please remember I am slowly learning Sketch up ;-) Oh and by the way. The shed is made of Colorbond. The wall height is 3.5m with the ceiling peaking at 4.5metres and the floor is currently concrete. Thanks Viccy

Viccy, Yes, moving things for door placement is possible but you may need to put an absorption panel on the back of the door if it is at an early reflection point. If you need design help, PM me. Cheers, John