Substantial posts by aswhitehead, who started the thread, and by the forum’s most active contributors. 13 of 36 posts are listed.
Page 1
aswhitehead, 23 May 2009After being in a temporary Mastering space for 3 years we figured it was time to build a new room. My partner and I have been operating a dedicated mastering room for…
aswhitehead, 23 May 2009John suggested that we remove the drywall on the ceiling at 7.5 ft and investigate turning the whole room into a cathedral ceiling. We had our carpenter look at the…
aswhitehead, 23 May 2009Our next job was tackling the framing. This was tough but our carpenter did a great job. Everything was on an angle! Here is the front wall. We still have to frame up 2…
aswhitehead, 24 May 2009John, We are almost complete! We have to finish the timber on the front wall and install some trimwork. We have someone building a custom desk for our equipment. After…
aswhitehead, 31 July 2009Wanted to add some updates. We are actually finished with the construction of the room. But I don't want to put the finished pictures up yet. I thought it would be…
aswhitehead, 31 July 2009We caulked every joint, seam, etc in the room. Here is my partner caulking in the bottom of the speaker platforms. External image, not preserved — original:…
aswhitehead, 31 July 2009Here is the rockwool in the slot resonators External image, not preserved — original: http://www.arejayinc.com/ftm/19_RightSlotRockwool.jpg External image, not preserved…
aswhitehead, 31 July 2009Here are the boxes we built to hold the speakers rigid. They are a very tight fit. The bottom part of the box is filled with concrete and everything is glued and…
aswhitehead, 31 July 2009Slats on right slot resonator and cloth on back wall (taken with cellphone). External image, not preserved — original: http://www.arejayinc.com/ftm/29_Slats.jpg Putting…
aswhitehead, 31 July 2009My father-in-law and I built a custom desk for the mastering room. This is during construction and does not show the 2 angled racks that were added to the top. We…
aswhitehead, 31 July 2009We finally finished the cosmetics of the room and were able to move in! :yahoo: Its almost impossible to believe we fit a mastering room AND a vocal booth into a space…
aswhitehead, 2 August 2009Thanks John & Ro! The argosy replica was kind of a "build it as you go" project. I had put together 2 argosy's before so I knew how they were constructed. The width was…
Soundman2020, 26 August 2009That's not really the acoustic equivalent of a slot resonator. It would be more like lining up several bottles of different sizes next to each other, and blowing across…