Soffit Problems!!!

Hi all, I am at the framing part of my build and i have run into a HUGE problem with my soffit design. As shown in the picture, my main monitors are too big for the cavity, I was looking at the dynaudio M3A, but with a depth of 19.8" It seems to be impossible. I was also looking at the ADAM S3A, but with a depth of 13" it still interferes with my framing. Please help! any recommendations? Would it be acceptable to remove a section of the framing to accommodate the Box for the monitors?

I think what you need to do is build out the soffit itself with the "green" part like this.

Would it be acceptable to remove a section of the framing to accommodate the Box for the monitors?

yes, provided you still create a box around the speaker that separates it from the outer framing.

Thnx for your response! I think i got it now.

Awesom to see you up and about Mr. Sayers!!

thanks - I've been very busy actually and unable to spend the time here I used to. But I am feeling better than I was before the attack :)