Substantial posts by fresh_oil_2003, who started the thread, and by the forum’s most active contributors. 7 of 27 posts are listed.
Page 1
fresh_oil_2003, 30 April 2008NOTE: IGNORE THE ISO BOOTH IN THE MIDDLE, WE’RE NOT DOING IT I have a contractor building my studio. He has Rod's book and is very detailed in his approach. He's not…
fresh_oil_2003, 9 May 2008Thanks Cram! Your space is looking great too!!! Flooding isn't an issue in my area. My house is new construction (18 months) and we've had some pretty bad rains here in…
rod gervais, 9 May 2008Some concerns - 1st - your isolation is as good as it's weakest link - in this case it's the walls with only 1 layer of drywall. That will be your effective isolation -…
fresh_oil_2003, 15 May 2008Great news...I was able to buy a control room/live room window from a gentleman who closed his studio. It's 7'x3', 3 layers of glass with 1/2" air gap between each…
fresh_oil_2003, 16 May 2008New updates: 1.) I have extra RSIC-1 clips, so we're going to use them on the control room side of the window wall w/ 2 layers of 5/8" drywall, with insulation between…
Lou, 16 May 2008Hi Fresh_Oil - Not sure where in the world you are? (Neither is anyone else at the moment! :wink: ) In reference to your enclosure question: From personal experience and…
fresh_oil_2003, 22 May 2008Bradjacob did an excellent job framing in his duct. .....question..... :?: Is it necessary to use the rsic-1 clips (or isomax clips in his case) when framing the duct?…