Page 1 of 1
6 or 12 degrees?
Posted: Wed Feb 26, 2003 8:08 am
by OzNimbus
Just curious on the control room side wall angles.... On the SAE site, it specifies 6 degree side walls, yet in a great number of plans, I see anywhere from 12-20 degree side walls... what gives?
Posted: Wed Feb 26, 2003 10:10 am
by John Sayers
depends on the space you have - 6 degrees is the minimum 12 is is the preferred
cheers
john
Posted: Thu Feb 27, 2003 9:52 pm
by simonstav
depends on the space you have - 6 degrees is the minimum 12 is is the preferred
Does this also apply for ceilings?
Regards Simon
Posted: Thu Feb 27, 2003 10:33 pm
by John Sayers
simon - I prefer more than 6 for ceilings if possible. I've had pinging with 6.
cheers
john
ceilings
Posted: Mon Mar 03, 2003 2:13 pm
by charoo
hey John!
in lots' of studio section offering by your site and other, i have found that ceiling construction is quiet hut style or we can say a bit triangular, i think thats' the great situation as its' breaking parellel nature of ceiling too. iS there any more technical aspect related with same.
luv
charoo
Posted: Tue Mar 04, 2003 7:14 am
by John Sayers
hey charoo - is that avatar you??
cheers
JOhn