Page 1 of 1

Rockwool, NSW Australia...

Posted: Wed Dec 13, 2006 7:42 am
by Musicianista
Here is a link to the guys at FM Insulation who have an extensive range of Rockwool & Fibreglass products for those on the east coast of Oz.

http://fminsulation.com.au/cms/

Don't forget your gloves and mask, Itchy! 8)

Cool!

Posted: Wed Dec 13, 2006 12:52 pm
by Sideshow
Hi Andy!

Thanks for posting this info - much appreciated.

I checked the site and one rockwool material listed is up near 90kg/sq metre - from what I have read this is probably a little too dense for proper bottom end control.

Take care with the choice buddy - I have gone with a semi rigid 35kg/sq metre material as advised by John.


All the best

Posted: Wed Feb 07, 2007 11:49 pm
by nymo
Hi Sideshow,

Could you please tell me exactly which wall insulation you used that John recommended for your studio...very nice looking btw !

Actually...i used to go to school with Simon Tonx..so if you see him...say hi from Nymo !!

Cheers
N
Y
M
O

Posted: Wed Feb 14, 2007 12:36 pm
by Sideshow
Nymo,

Great to hear from you - best thing to use is Dacron - made by Tontine - but it is VERY VERY expensive.

I went with Bradford semi rigid with tissue paper (supplied like that).
I used combinations of 25mm semi rigid against gyprock (comes with no paper) then 50mm with paper on top of that - i.e. inside of studio wall - then covered with acoustic cloth.
It is expensive as well but with the tissue paper you don't get exposed to the fibres in the studio.

Will say hi to Mr Tonx for you :)

Posted: Thu Jul 19, 2007 4:31 pm
by Willo
Sideshow wrote:Nymo,

Great to hear from you - best thing to use is Dacron - made by Tontine - but it is VERY VERY expensive.

I went with Bradford semi rigid with tissue paper (supplied like that).
I used combinations of 25mm semi rigid against gyprock (comes with no paper) then 50mm with paper on top of that - i.e. inside of studio wall - then covered with acoustic cloth.
It is expensive as well but with the tissue paper you don't get exposed to the fibres in the studio.

Will say hi to Mr Tonx for you :)
Can you please post info on the insulation product you used. Order number or product number etc. would be handy as I too rang the guys at FMInsulation and didn't really know if this was the right product. where you got it too would be great.
best thing to use is Dacron - made by Tontine - but it is VERY VERY expensive.
What are you referring to for the dacron? The material covering the insulation??

Ta

Willo