John Sayers' Recording Studio Design Forum Archive

Anyonewho can tell me how the rear wall in the Hello Testing studio has been made? I can't comprehend it - that's for sure

[/url]

The wall is a stud frame that leans forward so it's 1 foot from the wall at the top. The frame was then lined with rockwool.

The panels over the front are made of soft fiberboard, wrapped in fiberglass and covered with cloth as per attached pic.

cheers
john

Aaarh so cool! Thank you very much John. Nice with an illustration...

John Sayers wrote:The wall is a stud frame that leans forward so it's 1 foot from the wall at the top. The frame was then lined with rockwool.

The panels over the front are made of soft fiberboard, wrapped in fiberglass and covered with cloth as per attached pic.

cheers
john

Old thread - John, how are you then attaching these panels to the wall?