John Sayers' Recording Studio Design Forum Archive

im trying to construct a gobo similar to these plans

http://johnlsayers.com/Stuff/Draw1.pdf

anyone know what i could use for the "steel plate for wheels"

or any other ideas for trying to make the gobo flush with the ground and still have wheels.

oh also, any problems with making both sides soft? as opposed to one side reflective, one side absorbent.

Go to your local metal shop and ask them to weld you some. You won't be able to buy some.

>>>>>>also, any problems with making both sides soft?

no problem at all

cheers
john