John Sayers' Recording Studio Design Forum Archive

Should I buy 2'x4'x3' Trupanels and 2'x2'x2' Sonoflat panels or should I make my own? If you think I would be better served making them, are there any designs out there for this type of thing?

tedcrop wrote:Should I buy 2'x4'x3' Trupanels and 2'x2'x2' Sonoflat panels or should I make my own? If you think I would be better served making them, are there any designs out there for this type of thing?

Do you have Links to this products?

Aloha and welcome to the forum, tedcrop!

Congrats on your studio build! Any chance you could please:

Edit your profile to include your location. This is very important, because this is a worldwide resource, and as such, material costs and availability vary widely. For example, masonry is cheaper than gypsum in some parts of the globe, whereas it's the exact opposite in other regions.

You'll probably get more of a response by doing so and this will really come in handy two or three posts down the road. It's also part of the forum guidelines: http://www.johnlsayers.com/phpBB2/viewtopic.php?t=3231 Thanks!

Wall Units: http://www.johnlsayers.com/HR/index1.htm

Looking forward to your build!

Aloha

http://www.auralex.com/acoustic_foam_tr ... rutrap.asp

http://www.auralex.com/acoustic_foam_so ... noflat.asp