Page 1 of 1
Studio Glasses
Posted: Thu Jul 31, 2003 6:14 am
by Element_Al
Hy All... I wonder know how have to inlcinate the glasses of window between control room and recording room.... I know that must be 2 glasses but I don't know degrees of both.
Thank you.
peace.
Posted: Thu Jul 31, 2003 3:23 pm
by knightfly
Here is a link to some drawings that should help - they don't list angles, however - to minimise flutter John has found that you need a total of around 12 degrees of splay, or 6 degrees per glass. 6 degrees translates to 1 unit of offset for every 10 units of panel size. So, if you had 50 cm high glasses, they should be offset by 5 cm each.
If you don't have very much space between the two walls, it can make the glasses too close together for good isolation - in those cases, it's possibly better NOT to splay the glasses, and just use good absorption between the panes (surrounding the windows)