Pics of my home studio

pathdoc2 · Post by **pathdoc2** » Thu Nov 24, 2005 7:15 am

http://www.vinecrestaudio.com/studio.htm

This link will take you to pics of my home studio.

Thanks for looking.
I made all of my own furniture and racks as well as the room.

Post by **sharward** » Thu Nov 24, 2005 7:46 am

I love the looks of that place!

I'll bet the only thing you wish you had was more space, huh?

I see you used U-boats. I'm not a fan of them because of their lack of testing/specs... What has been your experience with them?

giles117 · Post by **giles117** » Thu Nov 24, 2005 8:45 am

Keith U-Boats are nothing more than shaped 1/2" neoprene.....

pathdoc2 · Post by **pathdoc2** » Thu Nov 24, 2005 9:25 am

I'm sure U boats are far from perfect. To honest I'm not perfect and neither is my studio setup. Everything is a balance. Budget vs time vs will to do more. For my purposes the room is adequately decoupled from the rest of my home. The studio sits in the back portion of our home over the master closet and workout room. Isolation is pretty good but could always be better.

I've had an inquiry for more info on my studio desk. More info can be found at the following link.

http://www.recordingproject.com/bbs/vie ... hp?t=16300

giles117 · Post by **giles117** » Thu Nov 24, 2005 9:29 am

pathdoc2 wrote: I've had an inquiry for more info on my studio desk. More info can be found at the following link.

http://www.recordingproject.com/bbs/vie ... hp?t=16300

Hey Steve, that was me you spoke with on the phone regarding your MCU desk design...

pathdoc2 · Post by **pathdoc2** » Thu Nov 24, 2005 9:40 am

Figured it was you. That link will have some helpful pics for your studio desk project.

pathdoc2 · Post by **pathdoc2** » Thu Nov 24, 2005 11:54 am

Hey Sharward, If I could I double the space. The room next to the studio is home theater and I sometimes use it a drum room. Works pretty good. Thanks for all the support.

pathdoc2 · Post by **pathdoc2** » Wed Dec 21, 2005 7:20 am

I've got a few inquiries about the trackball I'm using. Its made by Happ.

Here is a link for anyone interested in using a trackball. Its USB.
http://www.happcontrols.com/trackballs/565600xx.htm

You'll have to make sure and get the mounting hardware and mounting plate.