Page 1 of 1
Construction started..........help on treatment
Posted: Sat Apr 09, 2005 6:49 am
by 12bbb
Need help on how to treat the spaces.
Posted: Wed Apr 27, 2005 8:01 pm
by knightfly
http://www.johnlsayers.com/HR/index1.htm
Bottom of the page is a good start; have you tried the search function and broused quite a bit? Steve
Posted: Wed Apr 27, 2005 9:24 pm
by 12bbb
Yes I did browse and I have already read the tread you mention. But is that example the standard way to go or does it have to be adjusted to my spaces.
From what I read, the CR, Booth and recording space should not have the same treatment?
Erik
Posted: Thu Apr 28, 2005 3:52 am
by knightfly
True; your CR should be deader than the live room, for example; if your live room has an RT60 of around .5 to 1 second, then the CR should have about half (or less) that - and yes, this will be "room specific" - not sure if you've seen this, it should help with calculations -
http://www.saecollege.de/reference_mate ... m#verbcalc
Don't worry about getting the low frequency RT down as low as the rest of the spectrum; it can be at least 1.5 x as long as the RT from 500 hZ and up without problems (Live room, NOT the CR) - in the CR, you want everything short enough so that you know you're hearing the RECORDING room ambience, not the CR. This is the reason for a deader CR than your Tracking rooms (Vox booths excluded; these also need to be pretty dead because their modes SUCK, even good ones)
HTH... Steve