Page 1 of 1
Live (Studio) Floor
Posted: Wed May 21, 2003 8:14 am
by LDQ
I need some advice in to what type of flooring I should put on my live (studio). I had discussed with John S. that I would put a timber floor but after looking at the prices..
$$$
it can get kind of expensive...so with that being said can I get the same wood effect with a l-chipo synthetic flooring...I am not sure what material it is but the surface I believe has a very thin layer of wood or at least looks like wood, or what other options do I have (maybe parket).
Anyone?
Luis.
Posted: Wed May 21, 2003 10:47 am
by John Sayers
Bruce has some nice flooring Luis - I'm not sure what he used - maybe he can help.
cheers
john
Posted: Fri May 23, 2003 3:55 pm
by nukmusic
I going to use a thin vinyl floor that looks like wood floors. I seen it at Lowes, so Home Depot may also have it. I'll try to find link for you.
*****
something like this but the one I'm getting comes on a 12 ft roll cut to the length you need.
****
http://www.armstrong.com/commflooringna ... tem_id=360
Posted: Sat May 24, 2003 7:03 am
by LDQ
Thanks for your response nukmusic...I actually tought of doing the same thing but I am not sure how will vinyl affect the sound of the room. I kind of like the way percussion instruments such as congas and bongos sound with a wood floor and never tryied it with vinul flooring. I want to get a wood sound but the least expensive... Any one has some more suggestions...maybe Bruce.
Regards,
Luis.
Posted: Sun May 25, 2003 4:16 am
by knightfly
Luis, so far I've only found NRC info on painted concrete and (real) wood; wood seems to average about .14 at 125 hZ, where concrete is close to zip - both are nearly identical at higher freqs, and I've not yet found #'s for vinyl. Wood is going to be even higher NRC if it's over a wood floor and therefore has some panel absorber tendencies.
Of course, all these #'s are for 90 degree incidence so mic placement is still critical... Steve
Posted: Sun May 25, 2003 3:46 pm
by Blue Bear Sound
I used Birch Laminate flooring in my tracking rooms (supplemented with area rugs as needed).
I looked for the boxes of extras but can't find it off-hand... anyways, it was 2.99/sq ft (Cdn) and 9mm thick. They had a variety of finishes to choose from, and it was the only product at that price.
Stay away from the 1.29/sq ft stuff -- iit's complete crap!