Air tight....

LDQ · Post by **LDQ** » Sat May 17, 2003 7:04 am

Why is the need for a slot resonator to be air tight...like a bottle...In the case of a bottle there is only one opening where the air comes in and that produces a frequency that we all know gets absorved by the insulation. What happens when we make multiple slots...doesn't every slot need it's own space which is air tight in order to work? or when we say air tight we only mean to seal the sides and back wall of the slot resonator cavity???

Post by **John Sayers** » Sat May 17, 2003 9:52 am

doesn't every slot need it's own space which is air tight in order to work? or when we say air tight we only mean to seal the sides and back wall of the slot resonator cavity???

well barefoot would argue you need a separate cavity for greater efficiency but I don't entirely go along with that

so airtight means back and sides like you said.

cheers
john

knightfly · Post by **knightfly** » Sat May 17, 2003 3:51 pm

John, it's been a while since I read Barefoot's comments on that, but I was under the impression that the "septum" thing only was necessary if you were trying to do a VARIABLE slot, with (either/or) different slat/slot widths, tapered depth, etc - then, since the wavelength of the target sound waves is (usually) longer than slat width, all the "variations" would just be averaged without "septums" creating individual Hemholz traps.

Did I listen incorrectly? I really want to get this right, BEFORE I fire up the ole "Im-Plee-Mentz Uv Dee-Struk-Shun" again... Steve

Post by **John Sayers** » Sat May 17, 2003 5:32 pm

That's as I understand it steve, but as I've said before, I'm no scientist - I just build'em

- I think we'd better get barefoot to explain to us again as he's the person who suggested it.

cheers
john