John Sayers' Recording Studio Design Forum Archive

Posted: **Tue Apr 29, 2003 11:37 pm**

John

Please let me know the formula to tune your panel absorber. I am having a wall in my drum booth which is only covered by Foam, i want to replace it with real insulation stuff like rigid fiber and to turn into a wideband panel absorber. The air depth is around 150-500mm.

Posted: **Wed Apr 30, 2003 8:38 am**

There is no formula for panel absorbers. You can go to Ethan's site and get his drawings for a panel absorber.

cheers
john

Posted: **Mon May 05, 2003 3:32 am**

whats the link to build my own panels.

I'm going to be renting a house soon, and i don't want to permanent mount fiberglass to walls and such. Basically looking to build a portable panel, like minitraps or microcosm absobers, that i can hang on the wall like a picture.

Any diagrams to work off of, thinking it would be just 4'x2' panels.

Posted: **Mon May 05, 2003 6:06 pm**

toadies wrote:whats the link to build my own panels.

Check these links...

Courtesy of Ethan Winer and RealTraps

http://www.ethanwiner.com/BTPlans.gif
http://www.ethanwiner.com/BTParts.html