Door build plans

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

1970428scj
Posts: 44
Joined: Sat Feb 29, 2020 2:44 am
Location: california

Door build plans

Post by 1970428scj »

Hi I have ordered Rods book but it seems to be on back order, I downloaded the door from sketch up but it has a bug in it and crashes my session every time. Anyone have a plan to build a door that I can follow? I do have Johns sand filled door plans but looking around for others.
Thanks
Gregwor
Moderator
Posts: 1501
Joined: Wed Feb 01, 2017 6:03 pm
Location: St. Albert, Alberta, Canada

Re: Door build plans

Post by Gregwor »

Here's the one I used as a starting point for my personal build:

https://3dwarehouse.sketchup.com/model/ ... stic-Doors

Greg
It appears that you've made the mistake most people do. You started building without consulting this forum.
1970428scj
Posts: 44
Joined: Sat Feb 29, 2020 2:44 am
Location: california

Re: Door build plans

Post by 1970428scj »

Hi Greg, this is the same one you sent me on other thread but it has a bug and crashes my system every time I try to load it
Gregwor
Moderator
Posts: 1501
Joined: Wed Feb 01, 2017 6:03 pm
Location: St. Albert, Alberta, Canada

Re: Door build plans

Post by Gregwor »

Did you want one with or without a window? Did you want an open or a closed door? I can try to clean one up for your and send it to you... ?

Greg
It appears that you've made the mistake most people do. You started building without consulting this forum.
Post Reply