Here are the REW measurements for my room
Posted: Sun May 27, 2018 10:41 am
I followed Soundman2020's guide and got base measurements of my room. I have a considerable amount of treatment there already: superchunks in the four corners, the "reflection zone" is treated with a 6 x 4 x 4" panel of oc703 on each side and a 6 x 4 x 4" hanging cloud. I have a 6x4x4" panel on the back wall as well as two 2x4x"4 panels, and lastly two more 2x4x4" panels on the side walls towards the rear half. It is amazing how much tighter the room sounds now. I really wanted to do these measurements now to get an idea about what I am still dealing with when mixing.
At this point, if needed I could add some diffusion on some of the rear wall as well as some of the space in the back half of the side walls. If it made a big difference, I could still add some bass trapping between the front wall and ceiling, and the side walls and ceiling, but honestly I prefer not to if it's not needed because I am ready to get to work mixing!
The real downside of this room is that it is basically a 19x19x10 square, and there's nothing I can do about that fact.
https://www.dropbox.com/s/iydkkr4yckbvq ... .mdat?dl=0
At this point, if needed I could add some diffusion on some of the rear wall as well as some of the space in the back half of the side walls. If it made a big difference, I could still add some bass trapping between the front wall and ceiling, and the side walls and ceiling, but honestly I prefer not to if it's not needed because I am ready to get to work mixing!
The real downside of this room is that it is basically a 19x19x10 square, and there's nothing I can do about that fact.
https://www.dropbox.com/s/iydkkr4yckbvq ... .mdat?dl=0