XLR Wall Plate
Posted: Fri Mar 02, 2018 12:48 am
Hello everybody,
I am planning to build a recording studio. I have plan to build three separated rooms, one for the control room, another for drums, and lastly for vocals and guitars.
I´m thinking of installing wall plates from the control room to the other two rooms. One for the drums and other plate to the vocals/guitar room.
The wall plate will have XLR connection that it need to solder on the side of the control room. In the other side, the vocals/guitar room I will plug the microphones and guitars with a 1/4 TRS jack that can be pluck in the same conector as the XLR one. But my main question is that if I connect the Jack to the xlr on the other side of the plate the cable is a XLR running into my interface. I mean there will be a Jack connected into a XLR that then the xlr is connected into the interface. I don't know if I am explaining myself correctly. That would work ?
And my second question is that what other type of cable do I need to install in the wall plate to be future proof ? Maybe an ethernet CAT 5/6 cable, for a headphone mix ?
Thanks.
I am planning to build a recording studio. I have plan to build three separated rooms, one for the control room, another for drums, and lastly for vocals and guitars.
I´m thinking of installing wall plates from the control room to the other two rooms. One for the drums and other plate to the vocals/guitar room.
The wall plate will have XLR connection that it need to solder on the side of the control room. In the other side, the vocals/guitar room I will plug the microphones and guitars with a 1/4 TRS jack that can be pluck in the same conector as the XLR one. But my main question is that if I connect the Jack to the xlr on the other side of the plate the cable is a XLR running into my interface. I mean there will be a Jack connected into a XLR that then the xlr is connected into the interface. I don't know if I am explaining myself correctly. That would work ?
And my second question is that what other type of cable do I need to install in the wall plate to be future proof ? Maybe an ethernet CAT 5/6 cable, for a headphone mix ?
Thanks.