Home studio build V2.0 (clean slate)
Posted: Wed Mar 30, 2016 7:27 am
Hi again!
Since my original post was flooded with many ideas on my end (most of them crappy), i decided to create a new topic in order to better document the whole process of what is going to be my future mixing room.
I went for a "reflection free" (RFZ) type of build with soffits.
The room measurements are about 4.9mx3.7m and ceiling height is 2.8m.
Since i have a column in the ceiling that makes it uneven i'm going to create a gypsum ceiling with heigh of 2.5m. This makes my room stand right in the middle of the bolt area (good thing i think
)
Room modes calculations:
http://amroc.andymel.eu/?l=490&w=370&h= ... ing%20room
Design:
Although not visible it will have a cloud positioned in an anguled way to throw the ceiling reflexions to the back of the room and also absorb them.
Thank you for all the input that you guys can give me!
Since my original post was flooded with many ideas on my end (most of them crappy), i decided to create a new topic in order to better document the whole process of what is going to be my future mixing room.
I went for a "reflection free" (RFZ) type of build with soffits.
The room measurements are about 4.9mx3.7m and ceiling height is 2.8m.
Since i have a column in the ceiling that makes it uneven i'm going to create a gypsum ceiling with heigh of 2.5m. This makes my room stand right in the middle of the bolt area (good thing i think
)Room modes calculations:
http://amroc.andymel.eu/?l=490&w=370&h= ... ing%20room
Design:
Although not visible it will have a cloud positioned in an anguled way to throw the ceiling reflexions to the back of the room and also absorb them.
Thank you for all the input that you guys can give me!