John Sayers' Recording Studio Design Forum Archive

We have a glass wool product down under called "Noise Control BlockTM"
It retails at about 50% the price of 75mm rockwool and as you can see in the spec is actually 25mm thicker. It has an "R" rating of 2.3. Would this be OK to use in replace of rockwool in my wall/ceiling cavaties. It would really make a difference to my studios cost.

[u]Noise Control BlockTM[/u]
1140x580mm size sheets
100mm thick
20 peices per bale
13.22 m2 coverage per bale at 100mm thick
2.3 "R" rating

Thanks again

JohnG

According to
http://www.pinkbatts.co.nz/pdf/3f67c4c33abdb.pdf
Noise Control Block has these Sound Absorption Coefficients:
(thickness 125 250 500 1000 2000 4000 NRC)
100mm 0.50 0.85 1.10 1.10 1.10 1.10 1.04

You can compare that to other Rockwool of 75mm and 100mm shown at
http://www.bobgolds.com/AbsorptionCoefficients.htm

Overall I'd say it's good enough.

John,
Is there a link to a distributor of this stuff "down under"...?? thanks

sure,
heres the link:
www.pinkbatts.co.nz
Thanks
JohnG