Page 1 of 1
Anyone looking for 2300 sheets of rigid fiberglass!
Posted: Mon Jul 19, 2004 6:40 am
by fucanay
Hey guys. Anyone looking for 2300 sheets of 3 pound 2" foil faced rigid fiberglass?
There is a listing on ebay right now for exactly that.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW
In indiana. Feel free to buy it up and send me 25 sheets as a finders fee.
fucanay
Posted: Mon Jul 19, 2004 10:29 am
by Innovations
this made me curious so I poked around and based on the information surmised that it was this JM product.
http://www.jm.com/insulation/building_i ... shield.pdf
If you notice the unfaced product is much better as an absorber than the faced product that they are auctioning.
Posted: Mon Jul 19, 2004 10:42 am
by fucanay
It actually says right on there: "BOARD MANUFACTURED BY KNAUF FIBERGLASS."
But I have no idea what number. I think you can get the foil off fairly easily too.
fucanay
Posted: Tue Jul 20, 2004 8:30 am
by AndrewMc
Actually JM don't make it either - they subcontract out the manufacturing and have the manufacturer put their name on it.
Posted: Tue Jul 20, 2004 9:16 am
by fucanay
I emailed this guy and asked him if he was interested in selling this stuff in smaller quantities and he said if it didn't sell, he would consider it.
I'll post more info as I receive it.
fucanay
Posted: Wed Jul 21, 2004 4:29 am
by Innovations
fucanay wrote:It actually says right on there: "BOARD MANUFACTURED BY KNAUF FIBERGLASS."
But I have no idea what number. I think you can get the foil off fairly easily too.
fucanay
Doh! Missed that. Here is the spec sheet then
http://www.knauffiberglass.com/index.cf ... tail&ID=12
It would seem that the FSK improves the bass absorbency but decreases the mid and high frequency absorbency. substantially.
As for removing the FSK I wouldn't bet on that being easy. It is glued to the fiberglass so I would think that it couldn't be pulled off with out ripping off the upper levels of fiberglass too.