Help with Layout, Pleasee? :)

Plans and things, layout, style, where do I put my near-fields etc.

Moderators: Aaronw, kendale, John Sayers

Sen
Posts: 277
Joined: Wed Mar 26, 2003 11:07 pm
Location: Melbourne, Australia

Help with Layout, Pleasee? :)

Post by Sen »

Hi guys,
Geez, it's been a while.
Hope everyone is doing well and lots of rooms are being built.
I was hoping you could throw in a couple of ideas for a layout I might be working on soon.
I am attaching what I've come up with. It's not too bad, everything the place needs is included, but there are a couple of things that might have potential for improvement.
The area of the Live Room, straight ahead of the CR and just outside of drum booth is kind of narrow and "around a corner/behind" the CR. Do you think this looks akward?
Also, the CR could be a little longer, maybe...?
Plenty of height to work with... 5.5m on bottom side of the drawing, 7.5 on the long wall. Loading dock is right outside the entrance to the CR.
Any thoughts, ideas, sketches are much, much appreciated.
Thank you very much in advance :D
Kind regards
Sen
Sen
Posts: 277
Joined: Wed Mar 26, 2003 11:07 pm
Location: Melbourne, Australia

Re: Help with Layout, Pleasee? :)

Post by Sen »

Anyhting obvious you'd change there? :idea:
BTW, please ignore just the single lines separating different rooms. It would be "rooms within a room" construction.

Thanks!!
Kind regards
Sen
Soundman2020
Site Admin
Posts: 11938
Joined: Thu Aug 21, 2008 10:17 am
Location: Santiago, Chile
Contact:

Re: Help with Layout, Pleasee? :)

Post by Soundman2020 »

Anyhting obvious you'd change there?
That's really hard to say, from just a very basic line drawing like that! There's probably a few things that could be improved, but without seeing the design in more detail, there's not much to say! :)


- Stuart -
Post Reply