John Sayers' Recording Studio Design Forum Archive

Hi all,

I'm stuck with the coax cabling in my studio.
The spark installed wiring wich is 75Ohm coax cabling so i should be ok.

http://www.hirschmann-multimedia.nl/por ... (nl-k).pdf

But how can i choose from all the bnc options from neutrik to buy the right one?

http://www.neutrik.com/en/bnc/reartwist ... onnectors/

It's amazing how much there are

Why do you need coax in a sound studio? Do you have some type of video setup in there?

In my experience, Canare make the best BNC connectors for video, and Belden makes great coax cables.

- Stuart -

Wordclock distribution between the machine room and the control room.

The cables are already installed and have the right spec for the job. only there are so many options of connectors i'm lost. I want to find out what connectors are fitting on this cable.

It doesn't really matter: any good quality connector will work just fun. As I mentioned before, I have always used Canare connectors for all my installations, and they work fine.

- Stuart -