Page 1 of 1
Suppliers in NYC area?
Posted: Sun Apr 11, 2004 8:17 am
by linus
Hello;
I am building an iso booth in my studio space. I need suppliers for RC-1, Neoprene, Roxul or 703, and construction materials (drywall/lumber) in general and would appreciate any help with suppliers in the NYC area.
Thanks
Brian
Brian J. Bauhs
brianjbauhs@yahoo.com
Posted: Wed May 05, 2004 12:38 am
by Guest
Brian -
Don't know if you;ve already found suppliers, but if not:
For neoprene, try Canal Rubber - it's on Canal a block or two west of Broadway.
For 703, J&S Supply in Long Island City - don't remember the address, but it's right by the Greenpoint Ave. bridge from Brooklyn. I've been getting 1" unfaced 703 from them for .34/sq. ft.
For other general construction materials, I've been mostly using Kamco - they are a big supplier with several locations. They'd be a good bet for RC, Thermafiber, and any standard stuff like sheetrock, framing materials, etc.
Posted: Wed May 05, 2004 4:22 am
by Riad
Posted: Wed Jun 16, 2004 12:46 pm
by linus
J&S in Long Island City turned into the perfect supplier for OC 703. Funny guys, really helpful, low prices.
Canal street rubber was a great source for neoprene as well.
Thanks for the help.
Posted: Wed Jun 16, 2004 9:04 pm
by cfuehrer
I used a souce neoprene I found on here
http://www.fbw-cincy.com
I got 60 durometer 1/2" thick neoprene custom cut to Size: 1/2" thk x 2" x 36" long $ 3.93 each strip. From there I cut the strips myself into 2"x2" pucks. Contact info is:
Bev Phillips
bevp@fbw-cincy.com
F.B. Wright Co.
p 513-874-9100 800-582-0011
f 513-874-0235 800-874-0247