Page 1 of 1
Belair Studio - Rome - Italy.
Posted: Tue Jun 15, 2010 7:25 pm
by John Sayers
Alberto has finally had some pictures taken of his studio in Rome.
http://www.johnlsayers.com/Pages/Lombardi.htm
This is a basement studio, the ceiling height is 2.2m (7' 2") apart from a small section in the live room.
31319_1512109567784_1385735902_1409427_2111021_n.jpg
Re: Belair Studio - Rome - Italy.
Posted: Thu Jun 24, 2010 11:11 pm
by donal_finn
HMMM YUMMY!
Re: Belair Studio - Rome - Italy. --> my questions
Posted: Tue Oct 05, 2010 12:09 am
by FRESH-FOX
very nice.
I'm working right now on my studio in Dresden (pictures in a few days in a special thread) and I aim for a long time, that it should look in a similar way like those amazing Belair studio in Rome. So I have some questions to the community.
1. The slat sizes are not like in SAE Tutorial recommended 100mm, 50mm, 25mm? is it a problem?
2. The slot widths seem to be same overall. is it a problem?
3. Would it be correct if I will use: 170mm, 100mm, 60mm slat width an slot widths of 15mm, 10mm, 5mm?
4. Whats the right way to mount the slats on the studs? with screws??? In the Belair pictures I can't see any screws...and I also don't want to have those ugly screws
Is it possible to glue them to the studs, or do you have any other suggestions?
Thanks a lot for your help!
Kind regards from Germany
Re: Belair Studio - Rome - Italy.
Posted: Fri Aug 21, 2015 7:25 pm
by RomsMaklaet
apart from a small section in the live room.
[SPAM: REMOVED]
Re: Belair Studio - Rome - Italy.
Posted: Sat Aug 22, 2015 1:12 am
by Soundman2020
apart from a small section in the live room.
Huh? What is that supposed to mean? Please explain. And please also check the forum rules for posting...
- Stuart -