Vocal Booth Design

Plans and things, layout, style, where do I put my near-fields etc.

Moderators: Aaronw, kendale, John Sayers

John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Vocal Booth Design

Post by John Sayers »

Many members are requesting Vocal Booth designs.

Here's a design to fit into the corner of your room. The aircon ducting is an option.
Booth.skp
cheers
john
Funky Animal
Posts: 106
Joined: Fri Feb 22, 2008 10:36 am
Location: Nieuw-Buinen, The Netherlands

Re: Vocal Booth Design

Post by Funky Animal »

I will be using this John! Thank you very much!
Btw. Inside the vocal booth is that cloth against the walls?
Bikky
Posts: 1
Joined: Wed Apr 21, 2010 1:57 am

Re: Vocal Booth Design

Post by Bikky »

Great design. Request you to please list the materials used and the adequate dimensions of the vocal booth. I would like to build the same for my voiceover work. Thanks
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Re: Vocal Booth Design

Post by John Sayers »

Bikky - you can use the tape measure in sketchup to get all the measurements.

Funky Animal - yes its cloth stretched over pine frames.
blaumph2cool
Posts: 37
Joined: Sat Jan 17, 2009 10:06 am
Location: Portland, Oregon USA

Re: Vocal Booth Design

Post by blaumph2cool »

Hey John, I'm curious, doesn't the place where there is exposed frame need to be covered up with the double gyprock? or does that bit of the frame provide enough isolation.

Thanks,
-Chris
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Re: Vocal Booth Design

Post by John Sayers »

Chris all the gyprock is on the outside - I'm using the cavity for acoustic treatment.
Funky Animal
Posts: 106
Joined: Fri Feb 22, 2008 10:36 am
Location: Nieuw-Buinen, The Netherlands

Re: Vocal Booth Design

Post by Funky Animal »

Thanks John!
I really appreciate you sharing this with us!
blaumph2cool
Posts: 37
Joined: Sat Jan 17, 2009 10:06 am
Location: Portland, Oregon USA

Re: Vocal Booth Design

Post by blaumph2cool »

Sorry, I was talking about the outside. see pic where the gyprock doesn't cover the frame.
outterwall.jpg
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Re: Vocal Booth Design

Post by John Sayers »

oh - I see what you mean - well you could cover it if you felt you needed the extra isolation. The design is really for the home studio where it could be pulled apart and moved if necessary.
blaumph2cool
Posts: 37
Joined: Sat Jan 17, 2009 10:06 am
Location: Portland, Oregon USA

Re: Vocal Booth Design

Post by blaumph2cool »

Okay, that totally makes sense.

Thank you John.

-Chris
bwilkinson
Posts: 56
Joined: Tue Oct 27, 2009 1:25 pm
Location: Southwest Michigan USA

Re: Vocal Booth Design

Post by bwilkinson »

You know, John, that is one spot that I questioned in general. Building the inside-out walls seems to be a daunting task, in attempting to seal all the areas together after you build the sections. In order to be able to seal those corners, you need to be able to get to them - which would mean that you would need to leave enough space between your outer leaf ceiling and your inside-out ceiling to be able to crawl in and seal the corners, or you would have to leave enough space around your entire room to get to those edges.

In building the inside-out walls similarly to the way that you show in this small vocal booth, with the gypsum sealed against an outer reinforced frame, then sealing the framework together in the corners using acoustic caulk and either carriage bolting (or lagging) those together to get the lumber tight, how much isolation are you truly losing? It would stand to reason that you could still easily get a sealed area, and the lumber should be dense enough to act as your leaf....

....or am I missing something?
Thanks!
Bob
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Re: Vocal Booth Design

Post by John Sayers »

exactly Bob.
corner_seal.jpg
corner_seal_1.jpg
corner_seal_2.jpg
Kir For Pleasure
Posts: 14
Joined: Sun Oct 02, 2005 5:44 am
Location: Sweden
Contact:

Re: Vocal Booth Design

Post by Kir For Pleasure »

would this design work for a drum booth ? my problem with a drum booth is the ceiling height, i just have 6.7 and the minimum height for my lenght to stand straight up is 6.06, so insulating for ceiling and floor is just 0.65...can it be done with some insulating result ? its a basement room.
Metal is the Law !
Soundman2020
Site Admin
Posts: 11938
Joined: Thu Aug 21, 2008 10:17 am
Location: Santiago, Chile
Contact:

Re: Vocal Booth Design

Post by Soundman2020 »

would this design work for a drum booth ? my problem with a drum booth is the ceiling height, i just have 6.7
Do you just want to practice in their, or do you want to record? I very much doubt it would work for recording: That's way too low to even get overhead mics in decently, without even thinking about the terrible reflections and comb filtering you'd get off the ceiling with the mics right up against it.... Perhaps for practice, but not for recording. And it would be an extremely tight fit anyway, even for a very small drum kit! Don't think you could fit much in there at all... Maybe a snare and a hi-hat, along with your seat!


- Stuart -
John Sayers
Site Admin
Posts: 5462
Joined: Mon Jan 27, 2003 12:46 pm
Location: Australia
Contact:

Re: Vocal Booth Design

Post by John Sayers »

It's too small for a drum booth - you couldn't fit a kit inside.
Post Reply