John Sayers' Recording Studio Design Forum Archive

Hi all,

I was just wondering if anybody knows exactly which product from Insulco is the 703/705 equivalent?

kind regards,
Nate.
(Sydney, Aust)

Hi Nate,
I am not sure about product names but I use 48kg/m^3 fibreglass from Bradford CSR and from Insulation Solutions and it works fine. This equates to 3 pounds per cubic foot. If you ask the companies for 48kg fibreglass board they will understand. Email me if you need numbers etc.

Andrew

Thanks for the reply Andrew,

I have found a semi-rigid product from Insulco which I believe is the one.

Thanks for the info on the Bradford product. I will look into further. See which one is the most cost effective.

Nate.