Page 1 of 1
Re: studio in the woodland
Posted: Sun Oct 25, 2009 7:38 am
by John Sayers
Looks very beautiful mate.
Re: studio in the woodland
Posted: Mon Oct 26, 2009 2:25 am
by xSpace
Re: studio in the woodland
Posted: Mon Jan 25, 2010 8:55 pm
by dedindi
ooops
admins, my account and all my posts is dead =)
what the problem?
i do my new record with the same name
it's working
so, studio news - flashback
http://www.spivaki.com/
Re: studio in the woodland
Posted: Tue Jan 26, 2010 4:47 am
by John Sayers
dedindi wrote:ooops
admins, my account and all my posts is dead =)
what the problem?
i do my new record with the same name
it's working
so, studio news - flashback
http://www.spivaki.com/
because all you post is spam for that studio ! there you've done it again.
Re: studio in the woodland
Posted: Tue Jan 26, 2010 5:27 am
by Soundman2020
Strangely enough, it is even a dead link! There is no web site there any more...
A spammer who spams to a dead link in the Ukraine, must be rather more out of touch than the average spammer...
Re: studio in the woodland
Posted: Tue Jan 26, 2010 6:08 pm
by dedindi
i'm sorry for it, if you think abt me "spammer"
i'll go away, but...
John, pls, clear the situation
why in this forum "STUDIOS UNDER CONSTRUCTION FORUM ยป Other Studios"
my underconstruction other studio is a spam?!
i'm understand, you is King here
but... why?!
we do this studio from base, it's not building reconstruction
we have stone room - it's very rare
we thinking abt this project more than 10years before start
it's not interesting?
Re: studio in the woodland
Posted: Wed Jan 27, 2010 7:05 am
by John Sayers
dedindi - your original post was accepted - I even commented on how good it looked. The additional posts you made were unnecessary as we already had a link to the studio. Constantly posting the same address over and over became annoying.
Your site is posted, just leave it at that.
Re: studio in the woodland
Posted: Wed Jan 27, 2010 8:20 am
by dedindi
many thanks for clearing
pls, take my apologize
Re: studio in the woodland
Posted: Wed Jan 27, 2010 11:24 am
by John Sayers
no worries mate