John Sayers' Recording Studio Design Forum Archive

this will be my control room(dimensions in meters):



http://perso.wanadoo.es/josep.tvrdy/complete_studio.jpg

if I take the average of the angled walls 5.1-4.16 => 4.63m (15.2 ft)
from front to back 5.38-4.95 => 5.16 (16.9 ft)
the max available height is 2.8m (9.2 ft)

with the roomtune program:


that means that I will have some problems in 125Hz,185Hz and 250Hz area ?
any sugestion about diferent dimensions ?

thanks,

any sugestion about diferent dimensions ?

I think this works better ergonomically

cheers
john

Thanks Jonh !


the only question I have is about the wide of the room,the high and lenght will be the maximum available,what will it be better more wide or less than 5 m (16.4ft) ?

Josep - I drew the plan to scale and my plan says the width is 5m at the widest part of the control room. This gives a 12 degree splay to the walls.

cheers
john

do you think that the resultant HWL ratio( 9.2/15.2/16.9 ) 1:1.62:1.84 is acceptable ?

thanks,

Well - that's the average ratio really isn't it?

Treat it correctly and it will be fine.

cheers
john

thanks John,

I will start the construction soon if you are interested I can send pictures about the progress for your "Studios under construction"

Cool - good luck mate.

cheers
John