Floating floor and cable duct questions
Posted: Sat Nov 29, 2003 3:36 pm
I going to start building my floor soon and have a few questions before I start. It is going to be a wood over concrete floating floor. I'm wondering what the best way to run audio and power cable is. Should I use a cable duct in the floor? If so what is the best way to go about it? Should I install access panels? Or should I run everything in the walls and ceiling?
I'm thinking of using hardwood flooring in every room (control, ISO, and Live)is that a good idea?
I would be interested to know how far apart people are putting their 1/2" neoprene. Are there any formulas for calculating how much weight a neoprene pad can hold?
I think I'm just going to use a single layer of plywood on the floor. Would that be ok considering I'm putting hard wood above it?
Thanks
Lief Stevens
I'm thinking of using hardwood flooring in every room (control, ISO, and Live)is that a good idea?
I would be interested to know how far apart people are putting their 1/2" neoprene. Are there any formulas for calculating how much weight a neoprene pad can hold?
I think I'm just going to use a single layer of plywood on the floor. Would that be ok considering I'm putting hard wood above it?
Thanks
Lief Stevens