rehearsal space in existing tin shed

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

Arthur R
Posts: 2
Joined: Thu Feb 13, 2014 11:27 am

Re: rehearsal space in existing tin shed

Post by Arthur R »

neilstar wrote:some pix as requested
Hi Neil - quick question. How did the Daikin Sarara unit installation go in terms of sound proofing, quietness of operation and fresh air intake? did you use a passive vent out to push out stale air and prevent a build up of pressure. Thanks in advance for your thoughts as I am about to have a 4k unit installed in my 20sqm project build and plan to have a 100mm duct out to the cavity between the walls and then another duct from the outside wall also terminating in the cavity. In other words an indirect route out for stale air.

Cheers
Arthur
Arthur R
Posts: 2
Joined: Thu Feb 13, 2014 11:27 am

Re: rehearsal space in existing tin shed

Post by Arthur R »

neilstar wrote:some pix as requested
Hi Neil - quick question. How did the Daikin Sarara unit installation go in terms of sound proofing, quietness of operation and fresh air intake? did you use a passive vent out to push out stale air and prevent a build up of pressure. Thanks in advance for your thoughts as I am about to have a 4k unit installed in my 20sqm project build and plan to have a 100mm duct out to the cavity between the walls and then another duct from the outside wall also terminating in the cavity. In other words an indirect route out for stale air.

Cheers
Arthur
neilstar
Posts: 31
Joined: Tue Mar 26, 2013 9:44 pm
Location: south australia

Re: rehearsal space in existing tin shed

Post by neilstar »

Hi Arthur,

sorry for taking so long to reply, i have not completed my room yet, air con has not been completely installed, 1st fix only, im doing all the work myself in my spare time, i will give you an update when its completed, hopefully by end of the year

cheers Neil
Post Reply