This is looking from the live room into the control room through the studio window.
HUB Studio
Moderators: Aaronw, John Sayers
-
- Posts: 78
- Joined: Sat Feb 16, 2013 9:14 pm
- Location: Queensland, Australia
Re: HUB Studio
This is what we are proposing for the internal treatment of the Control Room. Note that the windows are now covered but can still open.
Bass traps in each rear corner and between at the ceiling corner.
Bass traps in each rear corner and between at the ceiling corner.
-
- Posts: 78
- Joined: Sat Feb 16, 2013 9:14 pm
- Location: Queensland, Australia
Re: HUB Studio
Just working out what pitch to put the cloud at. From the window to the back wall it is about 4600mm long and I have drawn it at a 330mm drop at the front which is about a 4 deg pitch.
Would this be fine?
Would this be fine?
-
- Posts: 78
- Joined: Sat Feb 16, 2013 9:14 pm
- Location: Queensland, Australia
Re: HUB Studio
Also the diffusion treatment on the back wall is being worked out now. We were thinking of these made out of 16mm MDF and then painted.