Flanking noise when treating common party wall.

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

Post Reply
DanCostello
Posts: 63
Joined: Tue Jun 09, 2015 7:07 pm
Location: Baltimore, MD

Re: Flanking noise when treating common party wall.

Post by DanCostello »

I can also attest to the surprisingly poor isolation characteristics of residential brick masonry construction. I'm in a brick rowhouse built around 1927 and can hear my neighbors quite easily. :-\

-Dan.
Top
Post Reply

Return to “Studio Construction”