acoustic treatment
-
knightfly
- Senior Member
- Posts: 6976
- Joined: Sun Mar 16, 2003 11:11 am
- Location: West Coast, USA
-
copper
- Posts: 42
- Joined: Mon May 23, 2005 2:04 am
- Location: Costa Rica
- Contact:
cool!
Alright Thanks!!!
1.can I do the same on the various absorbtion panneling I hang up on parrellel wall? or should some be without plastic?
2. Regarding the 3 corners asorbers.....4" of 2x4 stacked horizontally or 6"
of 2x4 stacked vertically?
Thanks again!
John
1.can I do the same on the various absorbtion panneling I hang up on parrellel wall? or should some be without plastic?
2. Regarding the 3 corners asorbers.....4" of 2x4 stacked horizontally or 6"
of 2x4 stacked vertically?
Thanks again!
John
-
copper
- Posts: 42
- Joined: Mon May 23, 2005 2:04 am
- Location: Costa Rica
- Contact:
I hope I am not being rude...I do not mean to as I know you guys are busy and i appreciate all the help.
Today was planning on putting up the corner absorbers but before I do, would like to know whether I should go 6 inches thick and stack vertical...2'x8'x6" or 4 inches thick ..stack horizontal 4'x8'x4".
I am a little limited on supply and between the two options there is a difference of using 6 2" thick pannels or 8 per corner.
Thanks!!
John
Today was planning on putting up the corner absorbers but before I do, would like to know whether I should go 6 inches thick and stack vertical...2'x8'x6" or 4 inches thick ..stack horizontal 4'x8'x4".
I am a little limited on supply and between the two options there is a difference of using 6 2" thick pannels or 8 per corner.
Thanks!!
John