wiring question isolated circuits

How thick should my walls be, should I float my floors (and if so, how), why is two leaf mass-air-mass design important, etc.

Moderators: Aaronw, sharward

chunger
Posts: 62
Joined: Sat Dec 06, 2003 9:00 pm
Location: Menlo Park, California

Post by chunger »

No problem,

I appreciate the amount of work you put into this site and answering all the various questions.

When it comes hammer time, let me know if I can be of any help in one of your ongoing projects. It's a short flight from San Francisco area to the northern west coast. . . unless, of course you're not actually in Portland area :)

Construction is going well. Had a scare because my 3/4" purpleheart floors were at the lumber wearhouse, and they just got flooded yesterday with 1 1/2 feet of water. Luckily, my floors are 6 ft. in the air on top of other stuff. . . went and checked this morning.

Have a good one,
'Chung
knightfly
Senior Member
Posts: 6976
Joined: Sun Mar 16, 2003 11:11 am
Location: West Coast, USA

Post by knightfly »

Actually, I'm about 80 miles south of Portland, just off I-5 -

I appreciate your offer, even though you have no idea what you'd be getting into :cry: How 'bout if you just buy my neighbot's house (don't like them anyway) and live next door for the next 5 years or so (+ however long it takes us to do YOUR projects too :? )

IF I had any sense, I would have either moved or burned the place "accidentally" and started over... Steve
Post Reply